Purchased a Crusader 88 hull, everything has been stripped from the boat, now after restoring the hull have come to refit stage,:-/ beings the boat was stripped by the last owner we would like to be sure that the fittings are going in the right place's. Own a Crusader but some of the fittings are different, does anyone have close up pictures of a Crusader 88 showing fittings ropes etc, or can anyone tell me the differance (if any)between the two boats, any help on this would be much appriciated.::)
The problem is fittings layout is generally quite individual. If I were you I would try fitting the obvious bits, then show us what's left...