Author Topic: Owners of Angell masts.. Help???  (Read 285 times)

StuW

  • Cabin Boy
  • Posts: 5
    • View Profile
Owners of Angell masts.. Help???
« on: July 18, 2017, 07:04:43 PM »
Need some help guys and girls.
I have been using an Angell mast which has been set up with free swinging spreaders but I want to be able to adjust them. Bought some selden adjusters but they do not fit into the carbon spreader bracket. I am presuming this spreader bracket is standard size on all of Rogers national 12 masts and if so can somebody tell me what make of spreader adjusters fit into it. Pulling my hair out and I haven't got a lot to spare so really need your help
Thanks
Stuart
N3546

Rob Starling

  • Guest
Re: Owners of Angell masts.. Help???
« Reply #1 on: July 18, 2017, 10:15:28 PM »
Hi

Had the same issue myself. I purchased some long 10cm I think m5 or was it m6 bolts. (I purchased a selection to try), They protrude a bit and when I have a moment I would look to purchase 8cm instead. Works though.

Rob 3429

John M

  • First Mate
  • Posts: 71
    • View Profile
Re: Owners of Angell masts.. Help???
« Reply #2 on: July 30, 2017, 08:30:21 AM »
Hi


Use U bolts as Rob suggests


Trim them to length with a hack saw and cut a new head into what is left so that you can still adjust them.  You don't need to buy shorter ones!


John

 
n12 Bottom Banner